Turn wood chips, wood sawdust, waste pallets, and MDF into fuel pellets, turning wood waste into treasure and making money, realizing the resource utilization of waste wood.
Many small furniture factories, panel factories, farms, etc. have a lot of raw materials, causing pollution and fire risks, so why not choose a small pellet machine? It can press waste wood and straw into fuel pellets and it’s easy transportation and storage. In addition to self-use, it can also be sold locally to create benefits for you.
If it is used at home, we recommend you choose a 7.5 kW or 15 kW wood pellet maker. If it is used in a small farm or factory, it is recommended to choose a wood pellet machine maker more than 22 kW. Its worn parts are only the flat die and the press roller shell, very simple to maintain.
80-150kg/h
300-400kg/h
600-800kg/h
800-1100kg/h
MODEL | MOTOR | PELLET DIAMETER | CAPACITY |
KXF200 | 7.5kw | 3mm-10mm | 80-150kg/h |
KXFD260 | 15kw | 3mm-10mm | 100-200kg/h |
KXFD300 | 22kw | 3mm-10mm | 200-300kg/h |
KXFD350 | 30kw | 3mm-10mm | 300-400kg/h |
KXFD400 | 37kw | 3mm-10mm | 400-600kg/h |
KXFD450 | 45kw | 3mm-10mm | 500-700kg/h |
KXFD550A | 55kw | 3mm-10mm | 600-900kg/h |
KXFD550B | 75kw | 3mm-10mm | 800-1100kg/h |
Many newcomers who just entered this industry have a question, Is there any difference between the pellets produced by the small flat die pellet machine and the large vertical ring die pellet machine? Will the pellets produced by the small pellet machine have a poor pellet density? Or the pellet-making rate is lower? We can answer you for sure, no! There is no any difference in the density of the pellets produced by our small pellet mill and the large ring die pellet machine. Pellets can reach 1.1-1.3g/cm3 both, and the molding rate can reach more than 99.9%.
Because the reducer we use is the same heavy-duty reducer no matter small or big pellet machines, it can provide enough pressure to produce high-quality wood pellets.
When planning a small wood pellet production line, you need to consider the following aspects.
What are your raw materials like? If your raw material is dry wood chips, then you only need a small pellet machine, which does not require crushing and drying. This is the simplest pellet production line and has the lowest production cost.
If your raw material is wood chips or wood, it needs to be crushed first. In a small-volume production line, it is recommended to use an integrated wood crusher because of its lower cost and smaller space needed.
If your raw materials are purchased from the local market, it is recommended to purchase dry wood sawdust directly, because drum dryers with good drying effects occupy a relatively large area and the drying increases the production cost also.
You can contact us to discuss more details.
No, because our machine is equipped with a heavy-duty reducer, and the heavy-duty reducer is equipped with an air-cooling system to ensure lubrication, so it will not stop automatically.
Yes, we can customize small diesel pellet mills below 55 Hp.
It is recommended that you start from a 15 kilowatts or 22 kilowatts small pellet mill, and then increase the capacity after the market is developed.
Our flat die pellet machines can produce feed, fuel, and fertilizer pellets all, as well as some RDF pellets.
Good question! Contact us and we will share with you professional documents that we hope can help you.